Search In this Thesis
   Search In this Thesis  
العنوان
Techno-feasibility study for producing dra in egypt using synthetic polymers /
الناشر
Mohamed Eid Mohamed Gouda Eid ,
المؤلف
Mohamed Eid Mohamed Gouda Eid
هيئة الاعداد
باحث / Mohamed Eid Mohamed Gouda Eid
مشرف / Samia Sobhy Mohamed
مشرف / Sahar Mohamed Elmarsafy
مشرف / Sherif Hassan Hadara
تاريخ النشر
2019
عدد الصفحات
179 P. :
اللغة
الإنجليزية
الدرجة
ماجستير
التخصص
الهندسة (متفرقات)
تاريخ الإجازة
17/9/2019
مكان الإجازة
جامعة القاهرة - كلية الهندسة - Metallurgical Engineering
الفهرس
Only 14 pages are availabe for public view

from 203

from 203

Abstract

The thesis is aimed to study the production of drag reducing agents (DRA’s) in Egypt using synthetic polymers, carriers, and additives by implementing several formulations with changing the weight percent of both polymer, carriers, and maintain the weight percent of additives as constant. Analysis of physical and fluid flow properties such as viscosity, shear stress. Fourier transformation Infrared Spectroscopy (FTIR) is executed on these formulations and the commercial product (control sample) which used in Khalda petroleum company. select the best formulations which take the same trend of the control sample or approach them, and tested them in experimental module which located in SUMED company at Alexandria terminal to assess the field results of local DRA’s and compare the results with the control sample. Assessment of the local prepared DRA’s, show that there is an improving effect on reducing the pressure DROP through the pipeline which leads to reduction in crude oil pumping energy or an increase in the pipeline capacity. The cost of one of the locally prepared samples is greatly reduced i.e. lower than that of control DRA used currently by crude oil producers